|
|
Post by wizofwuz on Feb 19, 2014 6:56:26 GMT -5
Hi Everyone,
I am looking for someone to install some headers and do some tuning work here in West Michigan. Prefer someone that specializes in stangs and has experience in tuning.
Thanks!!!!
|
|
|
|
Post by amustangrocks on Mar 8, 2014 14:10:39 GMT -5
Check down the page. John Force eng. is doing dyno tuning.I dont think you could go wrong there. Ive had really good tunes (email) from American Muscle. They bought Bama tunes a few years ago, and Doug the original owner worked there for a while, acquired Chris rose from Tillman speed and have really stepped up the tunes. Also C&L Intakes can write good tunes. (Doug from Bama writes tunes for them now)You`ll need a tuner, like the SCT unit I use to upload the tunes. As far as the headers, I`m sure there are shops that could do that if your not into doing it yourself.Just headers do not require a re tune.
|
|
|
|
Post by gtcs on Mar 8, 2014 17:53:30 GMT -5
If you don't mind a short drive to Northern Indiana Brentspeed is a mustang specialist did some work for me last year and he runs a first class shop
|
|
|
|
Post by amustangrocks on Mar 9, 2014 19:13:48 GMT -5
If you don't mind a short drive to Northern Indiana Brentspeed is a mustang specialist did some work for me last year and he runs a first class shop +1 another great place. |
|
|
|
Post by rbolser on Mar 19, 2014 20:26:45 GMT -5
Hi Everyone, I am looking for someone to install some headers and do some tuning work here in West Michigan. Prefer someone that specializes in stangs and has experience in tuning. Thanks!!!! C-Tech Performance has a Mustang Dyno. They charged me $100.00 last October for 3 pulls. They are located on Chicago Drive in Wyoming. Not sure about their work but they do have a nice Dyno! |
|
|
|
Post by wizofwuz on Mar 23, 2014 20:21:57 GMT -5
Thanks everyone!!! I appreciate the input and feedback!!
Brian
|
|
